Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateFast, Reliable Garage Door Repair Across San Bruno
A garage door that won’t open can trap a car, leave a house open to the street, and turn a normal morning into a scramble. We handle garage door repair for homeowners across San Bruno, from the flats around Crestmoor and Mills Park to the hillside streets climbing toward Skyline. We know how these doors age here, which matters more than most people expect. One call gets a specialist out to look at the real problem. Call (866) 812-8584. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Why San Bruno Homeowners Call Regent Garage Door Repair for Garage Door Repair
San Bruno has a particular mix of housing that we’ve learned inside and out. The stucco ranchers and split-levels built from the 1940s through the 1960s were fitted with doors and openers that have long outlived their expected service life, and plenty of them are still running on original hardware. Add the hillside homes where damp air off the Pacific speeds up corrosion, and you get repair calls that look simple until you open the door and see what’s actually going on.
That’s where specialization helps. We work only on garage doors and openers, not plumbing or electrical or general handyman jobs. When a door binds or an opener hums without lifting, the cause usually sits in one system or the other, and telling them apart is most of the diagnosis. Our technicians have up to 12 years of experience, and they arrive already familiar with the door and opener brands common on these blocks.
We’re licensed and insured, and you get a free estimate before anything is touched. San Bruno homeowners get a straight explanation of what’s worn, what can be saved, and what’s better replaced. The price is quoted and agreed before any work starts, so the invoice matches the number you said yes to.
Styles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
Commercial Garage Door Repair in San Bruno
Commercial Garage Door Repair in San Bruno covers the roll-up and sectional doors on small warehouses, auto shops, and storage buildings along the El Camino corridor and the light-industrial pockets near the airport. The failures look different from residential ones. These doors cycle far more often, so springs, drums, and bearings wear out faster, and a door that binds under a heavy curtain puts real stress on the tracks and the operator. We diagnose the mechanical side and the electric operator together so the fix holds.
Typical commercial repair in San Bruno runs $150 – $600, with spring work at $180 – $340 for one spring and track realignment at $120 – $240. The written estimate sets the final price.
High-Cycle Hardware and Operator Service
Doors that open dozens of times a day need springs rated for more cycles than a home door ever sees. We match the hardware to the traffic so you’re not back on the phone in a few months. Operator service covers the motor, the drive, and the safety edges as one system.
Binding Doors and Rolled Tracks
A commercial door that binds usually has a bent track, a worn roller, or a drum out of alignment. We straighten or replace the affected sections and check the whole run before calling it done. If the damage has gone too far, we’ll tell you plainly rather than keep patching it.
Garage Door Cable Repair in San Bruno
Garage Door Cable Repair in San Bruno is one of the calls we get most, because cables and springs age together in this coastal air. The cables on a garage door carry the full weight of the door alongside the springs, and when a strand frays the door can drop or come off its tracks. That’s a genuine hazard, so we treat a frayed cable as a stop-using-the-door situation until it’s fixed. Cable repair typically runs $130 – $250 in San Bruno, and the written estimate sets the final price.
Frayed Cables on Older Doors
On 50- to 70-year-old doors, the original cables often corrode from the inside out, and the first sign is a door that lifts crooked or a loud snap. We replace both cables as a set, since a matched pair wears evenly and one-sided replacement just moves the next failure up. Cables are under heavy tension, so this is a job for a trained technician, not a weekend project.
Drum and Cable-Wrap Problems
When a cable jumps its drum, the door can hang at an angle or bind against the track. The fix means resetting the cable wrap, checking the drum for rust pitting, and confirming the door travels level. We inspect the drums every time we’re in a cable repair, because corroded drums are a common cause of repeat failures.
Trusted Brands We Service in San Bruno
Door and opener brands show up in patterns around here, and the ones we see most on San Bruno homes include LiftMaster and Chamberlain openers, plus older Craftsman units that are still going. We’re factory-familiar with those systems and know their quirks before we arrive, which shortens the diagnostic time. We work on Raynor doors along with Clopay, Amarr, and Wayne Dalton, and on Genie openers. We don’t stock parts on a truck, but we source the right replacement quickly so most repairs don’t sit waiting. One call covers repair, opener service, and installation, so you’re not tracking down a different specialist for each piece.
See the difference
Before
After
Before
After
Before
AfterCommon Garage Door Repair Problems We See in San Bruno Homes
- Torsion springs seizing from salt-air corrosion. On hillside streets the marine layer keeps metal damp, and a spring that looks fine can seize within a few years. Homeowners often blame the opener when the real problem is a spring that won’t turn.
- Rust-pitted tracks and drums on older doors. Corrosion pits the galvanized track and throws the door out of alignment, so it binds or rides off the rails. On original one-piece and early sectional doors this shows up fast.
- Frayed cables and worn rollers on 50- to 70-year-old doors. The original hardware is often past its service life, and parts for it can be hard to find. Sometimes that forces a retrofit decision rather than a straight repair.
- Openers straining against a heavy door. When a door’s springs have weakened, the opener works harder than it should and eventually fails. We check the door’s balance first so we’re not replacing an opener that was fine all along.
Pricing for Garage Door Repair in San Bruno, CA
Garage door repair in San Bruno typically runs $150 – $600, depending on what’s worn and how much has to come apart. Here’s how the individual jobs break down. These are typical estimated ranges, and the written estimate you get before work starts sets the final price.
| Service | Typical Estimated Range |
|---|---|
| Garage Door Repair | $150 – $600 |
| Spring Repair (one spring) | $180 – $340 |
| Cable Repair | $130 – $250 |
| Opener Repair | $120 – $320 |
| Opener Installation | $250 – $550 |
| Panel Replacement | $250 – $500 |
| Track Realignment | $120 – $240 |
| Roller Replacement | $110 – $220 |
| New Door Installation | $700 – $2200 |
A single spring is the price above; a matched pair is usually replaced together, so a pair costs about twice that range. Opener installation and new-door pricing are scheduled work, so we measure and quote before ordering. Estimates are free, and the price is agreed up front.
We Also Serve Cities Near San Bruno
We work the Peninsula neighborhoods around San Bruno as well, including South San Francisco, Pacifica, Brisbane, and Broadmoor. The same fog-belt conditions that wear on hillside hardware in San Bruno carry over to the slopes in these neighboring towns, so the repair approach stays the same. If you’re just over the line in any of them, the call is the same.
Serving San Bruno, CA – Our Local Coverage Area
We serve San Bruno and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Garage Door Repair in San Bruno
You can often replace extension springs on their own, but on a door that old we look closely at whether a torsion conversion makes more sense. Extension springs stretch along the track and are more prone to dangerous failure, while torsion springs mount above the door and last longer with less wear on the surrounding hardware. If the door panels and tracks are still sound, a conversion can extend the door’s life; if the panels are warped or badly rotted, a new door may be the better spend. We’ll walk you through both paths with real numbers. Call (866) 812-8584 for a free estimate.
Springs fail faster on the hillside streets because the marine layer off the Pacific keeps metal damp and salty, and that accelerates corrosion. Technicians routinely find torsion springs seizing within a few years on the slopes toward Skyline, while the same hardware a few blocks down on the flats lasts around twice as long. That’s why we include a corrosion inspection when we quote a repair, so you know whether you’re looking at a one-off or a pattern. Call (866) 812-8584 to book an inspection.
A replacement opener needs working safety-reverse protection, which means the door should reverse when it meets an obstruction, along with functioning photo-eye sensors. On an older San Bruno home, the existing wiring and sensors are often the weak point, so we check them as part of the install rather than bolting on a new motor and leaving the rest. We don’t guess at local code; if you have a permit question, ask the city’s building department. Call (866) 812-8584 for a free opener estimate.
Most garage door repairs in San Bruno land between $150 and $600, depending on the parts and labor involved. Spring repair is typically $180 – $340 for one spring, cable repair $130 – $250, and track realignment $120 – $240. The written estimate sets the final price, and you get it free before any work starts. Call (866) 812-8584 for an exact quote.
Most binding commercial doors can be repaired, usually by realigning the track, replacing worn rollers, or resetting a cable drum. Replacement becomes the answer when the door panels or the structural frame are bent beyond straightening, or when the operator has failed repeatedly on a door that was never matched to it. We inspect the whole system before recommending either path. Call (866) 812-8584 for a free estimate.
If your garage door is sticking, loud, or won’t move at all, the fastest way to sort it out is a call. We handle repair, opener service, and installation for San Bruno homeowners from one specialty shop, so you’re not chasing down a different trade for each piece. Call (866) 812-8584 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Regent Garage Door Repair.